How to start a relay service for OzekiDesk
Download Ozeki Desk Relay server: OzekiDeskRelay.exe
Start Ozeki Desk relay service
Download OzekiDeskRelay.exe from the Ozeki website and run it on the computer that will act as the relay server. If Windows or security software asks for permission, allow the program to run. This application will provide the relay service that helps OzekiDesk connect computers through a central address.
In the Ozeki Desk Relay window, select Start relay service to begin operating the relay. Make sure the server has an active network connection and that any required firewall or router permissions are configured. Once started, the relay will be ready to accept OzekiDesk connections from both the screen-sharing and connecting computers.
After starting the service, confirm that Ozeki Desk Relay displays a Relay service running status. Keep this application open while the remote session is in use. Note the relay address shown by the program, because both OzekiDesk clients must use the same address to communicate through this relay server.
Share screen using relay service
On the computer whose screen you want to share, download and launch OzekiDeskSimple.exe. Allow the application to run if your operating system or antivirus software requests permission. This computer will act as the host, and it must remain connected to the relay service throughout the remote-desktop session.
In OzekiDesk on the screen-sharing computer, modify the relay address so it matches the address provided by your Ozeki Desk Relay server. Enter the address carefully, including the correct protocol, host name or IP address, and port if required. Both computers must use the same relay address for the connection to work.
Select Start screen share in OzekiDesk on the host computer. The program will create the connection details, including the remote ID and password. Leave OzekiDesk running and share the remote ID and password only with the trusted person who needs to access the shared screen.
On the computer from which you want to connect, download and launch OzekiDeskSimple.exe as well. This copy is used to access the remote computer rather than share its own screen. Ensure that it can reach the relay server over the network and that the relay service is still running on the server.
In OzekiDesk on the connecting computer, define the same relay address that was configured on the screen-sharing computer. The address must exactly match the one used by the relay service. A matching relay address allows both OzekiDesk clients to locate the same relay server and establish their connection.
Enter the remote ID and password displayed on the computer that is sharing its screen. Check each character carefully, because these credentials authorize the connection to that specific OzekiDesk session. Obtain the details directly from the person sharing their screen; do not share them publicly.
After entering the relay address, remote ID, and password, select Connect to remote screen. OzekiDesk will use the relay service to establish a connection with the host computer. If the relay is running and the credentials are correct, the remote screen should become available in the connection window.
Once the connection succeeds, you can view and interact with the remote computer’s screen from your own device. Confirm the session with the other person before taking control, and close OzekiDesk when finished. The page indicates that Figure 11 shows the successfully connected remote screen.