Ozeki DC Adapter

The Ozeki DC Adapter is for supplying extra power to the Ozeki Modules. You can connect the Ozeki DC Adapter perpendicularly to the Ozeki HUB Controller. Imagine a big Ozeki Matrix you might need to power. Ozeki DC Adapter is a perfect power solution. It is an open source board, with all the files needed for manufacturing. You may also freely modify the design.

The input of the Ozeki DC Adapter must be exactly 5V through a DC plug. All Ozeki Modules require 5V. If you have more then 5V we suggest the Ozeki DC-DC Converter. You can also connect the Ozeki DC Adapter to the matrix with an Ozeki Matrix Corner. You need to know that the Ozeki DC Adapter is not capable to transfer data.

HUB
HUB_top HUB_bottom
Figure 1 - Ozeki DC Adapter photos

Specifications:

  • INPUT: DC plug 5V, 2A
  • OUTPUT: USB power supply (5V, no data)
  • Resettable fuse: 2A
  • Reverse polarity protection circuit
  • POWER Led
  • Can be screwed on an Ozeki Matrix Board
  • Product dimensions:
    1.60in.[40.64mm]×0.80in.[20.32mm]
Download files for manufacturing

Pinout of the Ozeki DC Adapter:

pinout of the ozeki dc adapter
Figure 2 - Pinout of the Ozeki DC Adapter

More information