- PBX systems
- OZEKI Phone System XE
- SipX ECS
- Port assignments
- Upload Arduino code
FreePBX, how to create a SIP account
This guide shows you how to create an extension. The extension can be used with Ozeki. Before you start to configure this solution it is assumed that you have already installed your FreePBX on a Linux distribution.
In this example I have installed FreePBX on a computer which IP address is 192.168.91.99. You can reach and configure FreePBX through its web interface. In order to configure FreePBX navigate to the IP address of your installation using the web browser and click on the 'PBX Administrator' icon (Figure 1).
Figure 1 - FreePBX in your browser
Login as administrator with the password you set during the installation (Figure 2).
Figure 2 - Login as Administrator
Once you logged in, click on 'Extensions' (Figure 3).
Figure 3 - Click on Extensions
Now you can add an extension to your configuration. To do this, select 'Generic SIP Device' from the Device list, and click on 'Submit' (Figure 4).
Figure 4 - Add a generic SIP device
Fill the User Extension, Display Name and the SIP Alias field, and scroll down the configuration form (Figure 5).
Figure 5 - Configuration fields
Provide the SIP password at the secret field. In this example it will be abc123 (Figure 6).
Figure 6 - Provide SIP password
Once it is done, click on 'Submit' (Figure 7).
Figure 7 - Click on 'Submit'
To apply the new extension, click on 'Apply Configuration Changes' at the top of the page (Figure 8).
Figure 8 - Apply configuration changes
The changes will be applied by reloading the config file of the PBX. Click on 'Continue with reload'.
Figure 9 - Reload configuration file
Now the configuration is complete so you can start your phone lines and connect them with Ozeki.